Stromberg Needle & Seat Holden SPECIAL HI FLOW .101" Stainless Steel needle

SPECIAL HI FLOW N & S .101" Dia. orifice, with Stainless Steel needle, for Australian B Series carbs

original orifice diameter was 0.070” and 0.073” in most applications, some had 0.093”

suits the following Australian B Series Stromberg Carburettors:

BOV-2; BV-2; BXOV-1; BXOV-2; BXUV-2; BXUV-3; BXV; BX;

Suits the carbs fitted to these vehicles if higher fuel flow is required

Chrysler Valiant VC; VE; VF; 145HP. 225 CI. with BXUV-3 1966-70

Ford Cortina , Ghia TC; TD; with BV-2; BOV-2 1972-76

Ford Cortina, Ghia TD; TE; TF;  with BX 1976-82

Ford Falcon XR; XT; XW; XY; XA; 170-250 CI. with BV-2; BOV-2 1966-73

Ford Falcon XA; XB; 200, 250 CI. with BOV-2 1972-76

Ford Falcon XC; XD; 3.3; 4.1L with BX 1976-2/80

Holden Commodore 2.8L; 3.3L with BX 1978-79

Holden FJ-HJ all 6 Cyl with BXV; BXOV-1  1948-76

Holden HD-X2; HR-X2; 2930 CC. with BXUV 1965-67

Holden HX; HZ; 2.8L; 3.3L with BX 1976-79

Holden Torana LC; LJ; LJ-GTX; LH; 179, 186 CI. with BXUV-2; BXUV-3 1969-75

Holden Torana LH; LX; 2.8, 3.3L with BXUV-3 1975-76

Holden Torana LX; UC; 2.8, 3.3L with BX 1976-79

compare std N & S to SBNS592 on right