SU Carburettor Parts

SU Carburettor Steel Washer, bowl mount, H type using AUC1387 mounting Stud (AUC1388)

SU Carburettor Steel Washer P/N AUC1388; For bowl mounting stud used on some H type carburettors using AUC1387 Stud In illustration below Stud AUC1387 is No.45 This was..

$4.00 Ex Tax: $3.64

SU Carburettor Steel Washer for bowl mount H type with AUC1387 Stud (AUC1389)

SU Carburettor Steel Washer P/N AUC1389; For bowl mount on H type using AUC1387 alternative mounting Stud In illustration below Stud AUC1387 is No. 45 This washer is No. 48 u..

$5.00 Ex Tax: $4.55

SU Carburettor Bowl Gasket - T1 bowl 1-3/4" OM, H, H Thermo Types (AUC1412)

SU Carburettor Bowl Gasket fits T1 bowl 1-3/4" Dia P/N AUC1412 As fitted to OM and H Type Carburettors ..

$3.00 Ex Tax: $2.73

SU Carburettor Rubber Grommet suits H Type using AUC1387 or AUC1335 mounting bolt, 2 grommets required (AUC1534)

SU Carburettor Rubber Grommet P/N AUC1534; Suits H Type bowl when using AUC1387 or AUC1335 mounting Bolt. NOTE: these grommets are only used on certain vehicles and NOT supplied ..

$5.50 Ex Tax: $5.00

SU Carburettor Alloy Washer, use with Bowl Lid Bolt AUC1867,OM, HV3, HV5, H, H Thermo, H8, HD, (AUC1557)

SU Carburettor Alloy Washer P/N AUC1557 As used with: Long Bowl Lid Bolt AUC1867 In these SU Carburettors: OM; HV3; HV5; H; H Thermo; H8; HD..

$3.00 Ex Tax: $2.73

SU Carburettor Bowl Holding Bolt H, OM, HV3, H Thermo alternative type (AUC1541)

SU Carburettor Fuel Bowl Holding Bolt suits H; OM; HV3; H Thermo Type, alternative P/N AUC1541 As used by all early SU Carburettors other than those using T4 fuel bowls Holds fu..

$19.00 Ex Tax: $17.27

SU Carburettor Fibre Washer Serrated, bowl lid nut, OM, H, HV3, HD, Types (AUC1928)

SU Carburettor Fibre Washer P/N AUC1928 Serrated for float bowl lid nut on OM; H; HD; HV3; As used with overflow pipe fitted and long holding bolt SEE BELOW..

$3.00 Ex Tax: $2.73

SU Carburettor Float Lever, T1 Bowl, OM, HV, H, HD Copper Plated (AUC1981)

SU Carburettor Float Lever Copper Plated P/N AUC1981 Suits T1 Bowl As used in OM, HV, H and HD Carburettors This lever is 1.15" Long O/all..

$38.50 Ex Tax: $35.00

SU Carburettor Taper Pin throttle stop to shaft OM, HV3, HV5, HV8, H, H Thermo, H8, HD (AUC2106)

SU Carburettor Taper Pin throttle stop to shaft OM, HV3, HV5, HV8, H, H Thermo, H8, HD P/N AUC2106..

$3.00 Ex Tax: $2.73

SU Carburettor Brass Gland Washer for main jet OM HV3 HV5 H H-Thermo H8 (AUC2119)

SU Carburettor Brass Gland Washer for main jet P/N AUC2119 SOLD PER EACH As used in: OM; HV3; HV5; H; H-Thermo; H8; Type Carburettors Requires ..

$5.00 Ex Tax: $4.55

SU Carburettor Brass Throttle Stop Left Hand - 5/16" Diameter [AUC 2198]

SU Carburettor Brass Throttle Stop Left Hand - 5/16" Diameter [AUC 2198]..

$66.00 Ex Tax: $60.00

SU Carburettor Brass Throttle Stop Right Hand - 1/4" Diameter [AUC 2197]

SU Carburettor Brass Throttle Stop Right Hand - 1/4" Diameter [AUC 2197]..

$66.00 Ex Tax: $60.00

SU Carburettor Throttle Stop Left Hand [AUD2253]

SU Carburettor Throttle Stop Left Hand [AUD2253]..

$66.00 Ex Tax: $60.00

SU Carburettor Fibre Washer for bowl holding bolt AUC1541 (upper position) OM HV3 HV5 H H-Thermo H8 (AUC2130)

SU Carburettor Fibre Washer P/N AUC2130 For alternative bowl holding bolt AUC1541 (in upper position, above bowl flange) OM; HV3; HV5; H; H-Thermo; H8; In illustration below Bolt..

$3.00 Ex Tax: $2.73

SU Carburettor Fibre Washer for Fuel Inlet under Banjo Bolt OM; HV3; HV5; HV8; H; H Thermo; H8; HD; requires 2 (AUC2141)

SU Carburettor Fibre Washer Sold per each P/N AUC2141 SOLD PER EACH Used on Fuel Inlet Banjo and Bolt SU Carburettors OM; HV3; HV5; HV8; ..

$3.00 Ex Tax: $2.73

SU Parts