SU

SU Carburettor Float Lever, T1 Bowl, OM, HV, H, HD Copper Plated (AUC1981)

SU Carburettor Float Lever Copper Plated P/N AUC1981 Suits T1 Bowl As used in OM, HV, H and HD Carburettors This lever is 1.15" Long O/all..

$38.50 Ex Tax: $35.00

SU Carburettor Taper Pin throttle stop to shaft OM, HV3, HV5, HV8, H, H Thermo, H8, HD (AUC2106)

SU Carburettor Taper Pin throttle stop to shaft OM, HV3, HV5, HV8, H, H Thermo, H8, HD P/N AUC2106..

$3.00 Ex Tax: $2.73

SU Carburettor Brass Gland Washer for main jet OM HV3 HV5 H H-Thermo H8 (AUC2119)

SU Carburettor Brass Gland Washer for main jet P/N AUC2119 SOLD PER EACH As used in: OM; HV3; HV5; H; H-Thermo; H8; Type Carburettors Requires ..

$5.00 Ex Tax: $4.55

SU Carburettor Brass Throttle Stop Left Hand - 5/16" Diameter [AUC 2198]

SU Carburettor Brass Throttle Stop Left Hand - 5/16" Diameter [AUC 2198]..

$66.00 Ex Tax: $60.00

SU Carburettor Brass Throttle Stop Right Hand - 1/4" Diameter [AUC 2197]

SU Carburettor Brass Throttle Stop Right Hand - 1/4" Diameter [AUC 2197]..

$66.00 Ex Tax: $60.00

SU Carburettor Throttle Stop Left Hand [AUD2253]

SU Carburettor Throttle Stop Left Hand [AUD2253]..

$66.00 Ex Tax: $60.00

SU Carburettor Fibre Washer for bowl holding bolt AUC1541 (upper position) OM HV3 HV5 H H-Thermo H8 (AUC2130)

SU Carburettor Fibre Washer P/N AUC2130 For alternative bowl holding bolt AUC1541 (in upper position, above bowl flange) OM; HV3; HV5; H; H-Thermo; H8; In illustration below Bolt..

$3.00 Ex Tax: $2.73

SU Carburettor Fibre Washer for Fuel Inlet under Banjo Bolt OM; HV3; HV5; HV8; H; H Thermo; H8; HD; requires 2 (AUC2141)

SU Carburettor Fibre Washer Sold per each P/N AUC2141 SOLD PER EACH Used on Fuel Inlet Banjo and Bolt SU Carburettors OM; HV3; HV5; HV8; ..

$3.00 Ex Tax: $2.73

SU Carburettor Suction Chamber Screw OM, HV3, HV5. (AUC2175)

SU Carburettor Suction Chamber Screw OM, HV3, HV5. (AUC2175)sold individually - price is per screw..

$5.50 Ex Tax: $5.00

SU Carburettor Throttle Shaft for HV3 carby (AUC3054)

SU Carburettor Throttle Shaft for HV3 carby P/N AUC3054 ..

$39.00 Ex Tax: $35.45

SU Carburettor Jet Bearing Brass H, H8 type (AUC3231)

SU Carburettor Jet Bearing Brass H type, H8 type (AUC3231) ..

$25.00 Ex Tax: $22.73

SU Carburettor Copper Washer for main jet bottom bearing, OM, HV3, HV5, HV8, H, H-Thermo, H8, types (AUC3233)

SU Carburettor Copper Washer P/N AUC3233 As used on bottom bearing of main jet in the following SU Carburettors: OM; HV3; HV5; HV8; H; H-Thermo; H8..

$3.00 Ex Tax: $2.73

SU Carburettor Throttle Shaft H4 Std Dia MG TD TF etc (AUC3242)

SU Carburettor Throttle Shaft H4 Type 1½" Dia P/N AUC3242 Overall length is 200mm special extended shaft Diameter: 5/16” = 0.311” = 7.91mm Standard ..

$39.00 Ex Tax: $35.45

SU Carburettor Flange Gasket HV3, H2, HS2, 1-1/4 inch Dia (AUC4275X)

SU Carburettor Flange Gasket HV3; H2; HS2; 1-1/4 inch Dia. P/N AUC4275X ..

$5.50 Ex Tax: $5.00

SU Carburettor Flange Gasket suits H4, 1-1/2" Dia Throat Carb (AUC4278X)

SU Carburettor Flange Gasket suits H4 Carburettor 1-1/2" Dia Throat..

$5.50 Ex Tax: $5.00