Fuel pressure regulator adjustable 1/2 to 5.5 psi 8mm tails SYTEC Pro-Flow highly accurate regulator [900.PRO54]
![]() Click to enlarge |
|
Fuel Pressure Regulator SYTEC PRO54 fully adjustable from 0.5 psi to 5.5 psi P/N 900.PRO54
Supplied with 8mm [5/16”] hose tails and jubilee clips
This is a Pro-Flow highly accurate pressure regulator
Ideal for use with classic and vintage vehicles where an aftermarket electric pump has been fitted.
These electric pumps invariably create far too much pressure on the needle and seat in the carburettor
This leads to flooding and can be dangerous if uncontrolled
Adjustment range from 0.5 to 5.5 psi in ½ psi increments
Maximum flow 150 lph
Maximum input pressure should not exceed 10 psi.
Instructions included in pack
The use of a thread tape is recommended on the tails.
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:

Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: